|
|
|
Principles of traditional descriptive geometry of points, lines, planes and solids, done with modern tools. Selections, auxiliary views, intersections and developments, pictorial drawings. Principles of 2D and 3D computer-aided drafting (AutoCAD) used in areas of civil engineering. Structural drafting pertaining to steel, concrete and timber construction, standards and conventions. Drafting room and computer lab exercises are assigned. Constructed solutions with vector diagram projection; comparison with equivalent vector algebraic methods. Graphical statistics, concurrent force problems including pure axial force plane structures.
|
|
|
|
Lect: 2 hrs./Lab: 2 hrs.
|
|
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
241
|
|
Environmental Science for Engineers
|
|
|
The basic scientific principles of environmental science in the areas of chemistry, physics, ecology, meteorology, microbiology and epidemiology. Methods of sampling and analyzing air, water and waste water quality. Environmental pollution in the atmospheric, aquatic and terrestrial systems. Effects of environmental disturbances arising from overpopulation, urbanization, industrialization and energy consumption. Preventive solutions and sustainable development.
|
|
|
|
Tut: 2 hrs./Lect: 3 hrs.
|
| Prerequisite: CHY 102
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
312
|
|
Computer Aided Structural Analysis
|
|
|
Basic concepts of structural analysis; virtual work; flexibility and stiffness methods, applications to trusses, beams and frames; computer analysis of structures; structural analysis programs; introduction to the finite element method of analysis.
|
|
|
|
Tut: 2 hrs./Lect: 3 hrs.
|
| Prerequisites: CVL 313 and (MTH 340 or MTH 425)
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
313
|
|
Structural Analysis
|
|
|
Deflections of structures: moment-area theorems, conjugate-beam method, virtual work and Castigliano's theorem. Approximate analysis of statically, indeterminate structures. Analysis of continuous beams and frames using the slope-deflection method. Analysis of statically indeterminate structures using the moment-distribution method. Influence Lines for statically determinate structures.
|
|
|
|
Tut: 2 hrs./Lect: 3 hrs.
|
| Prerequisite: CVL 420
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
316
|
|
Transportation Engineering
|
|
|
Introductory level course on transportation engineering, including transportation system characteristics, classification, mathematical models, and modes; transportation planning (trip generation, trip distribution, mode choice, and traffic assignment); highway geometric design; traffic flow characteristics; capacity and level of service; queuing and simulation models; and evaluation of transportation impacts.
|
|
|
|
Tut: 1 hr./Lect: 3 hrs.
|
| Prerequisite: MTH 425
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
320
|
|
Strength of Materials I
|
|
|
Analysis of trusses, frames, beams, arches and cables. Analysis and diagrams of reactions, shear forces and bending moments. Review of moments of inertia. Normal, shearing, and bearing stresses. Deformation and strains. Temperature effects. Stress-strain relationship and the generalized Hooke's law. Axial loading applications and pressure vessels. Stress concentrations. Stress transformation equations and Mohr's circle for plane stress analysis. Analysis of plane stresses and strains. Strain measurement and rosette analysis.
|
|
|
|
Tut: 2 hrs./Lect: 4 hrs.
|
| Prerequisites: CEN 100, CHY 102, CPS 125, MTH 140, MTH 141, MTH 240, MTL 200, PCS 125, PCS 211 and (CVL 207 or MEC 222)
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
323
|
|
Fundamentals of Surveying
|
|
|
Introduction to surveying theory and techniques, taping, electronic distance measurements, angle measurements, traversing, traverse adjustments, leveling, field calibration of instruments; fundamentals of mapping; coordinate geometry; civil engineering applications.
|
|
|
|
Lect: 3 hrs./Lab: 2 hrs.
|
| Prerequisites: CEN 100, CHY 102, CPS 125, MTH 140, MTH 141, MTH 240, MTL 200, PCS 125, PCS 211 and (CVL 207 or MEC 222)
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
352
|
|
Geomatics Measurement Techniques
|
|
|
Horizontal and vertical control; azimuth determination methods; horizontal and vertical curves; construction, engineering and topographic surveys including contouring; introduction to photogrammetry, remote sensing, satellite positioning and geographic information systems; civil engineering applications.
|
|
|
|
Lect: 3 hrs./Lab: 2 hrs.
|
| Prerequisite: CVL 323
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
353
|
|
Municipal Planning and Engineering
|
|
|
The function and structure of the Planning Act and other statutes which affect land use changes. Planning instruments and their interpretation: official and secondary plans, zoning by-laws, site plan controls, minor variances, land division by consent and by plan of subdivision. The subdivision design process. Integration of stormwater management plans, wetlands and fisheries policies and other environmental controls. Municipal infrastructure design, location, operation and maintenance.
|
|
|
|
Lect: 2 hrs./Lab: 1 hr.
|
| Prerequisite: CVL 241
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
354
|
|
Remote Sensing and Image Analysis
|
|
|
The course covers an overview of the principles of remote sensing and image analysis from a Geomatics Engineering perspective. Topics include: basic characteristics of electromagnetic radiation, radiation interactions with terrestrial materials and atmospheric effects, remote sensing platforms, active and passive sensors, geometric and radiometric corrections, visual image interpretation, image enhancement and transformation, thematic classification, applications of change detection, environmental monitoring and mapping.
|
|
|
|
Lect: 3 hrs./Lab: 2 hrs.
|
| Prerequisites: PCS 125 and (MTH 203 or MTH 410)
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
|
|
This course considers structural systems, commencing with the design of individual members discussed in Structures II and moving to the design of the whole building. The course develops the concept of a building comprised of horizontal and vertical systems that are organized strategically. Alternative arrangements of structural systems are considered based on their structural behaviour and their relationship to materials of construction. Building lateral loads and load transfer mechanisms are explored. The course concludes with a discussion on connections and detailing of components of complex systems, exploring examples for specific materials.
|
|
|
|
Lect: 3 hrs.
|
| Prerequisite: ASC 303
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
410
|
|
Structural Concrete Design I
|
|
|
Limit states of design; Engineering properties of concrete and reinforcement; Design of reinforced concrete beams for shear and flexure; Design of continuous beams and T-beams; Development, anchorage, and splicing of reinforcement, Design of one-way slabs; Design of columns; Design of concrete members for serviceability.
|
|
|
|
Tut: 2 hrs./Lect: 3 hrs.
|
| Prerequisite: CVL 420
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
411
|
|
Structural Steel Design
|
|
|
Engineering properties of steel; tension members; compression members; beams subjected to bending and shear; composite beams; welded plate girders; beam-column; welded and bolted connections; base plates under axial load and bending; overall stability; fatigue design; introduction to plastic analysis and design; complete design of a one-storey building in steel.
|
|
|
|
Tut: 2 hrs./Lect: 3 hrs.
|
| Prerequisites: CVL 313 and CVL 420
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
420
|
|
Strength of Materials II
|
|
|
Torsion and angle of twist. Beam bending. Flexural and shear equations. Compound stresses. Theories of failure. Deflection of beams. Euler's formula for columns and its modification for codes. Inelastic behaviour of members. Experimental laboratory work involving flexural stress, deflection of beams and buckling load of columns.
|
|
|
|
Lect: 3 hrs./Lab: 2 hrs.
|
| Corequisite: CVL 434, Prerequisites: CEN 100, CHY 102, CPS 125, CVL 320, MTH 140, MTH 141, MTH 240, MTL 200, PCS 125, PCS 211 and (CVL 207 or MEC 222)
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
423
|
|
Geology for Engineers
|
|
|
This course provides Civil Engineering students with an understanding of the physical world in which they work and live. The course deals with the following topics: structure of the earth, plate tectonic theory and continental drift, minerals, rocks and their mode of formation, erosion and weathering, soil formation, folding and fracturing of rocks, earthquakes, volcanoes, glacial landforms and permafrost, ground and surface water, rock mass stability, mass wasting, and the physiography of Canada. The engineering significance of each topic is illustrated by practical examples. Laboratory activities include mineral and rock identification and interpretation of topographic and geological maps.
|
|
|
|
Tut: 1 hr./Lect: 3 hrs.
|
| Prerequisites: CEN 100, CHY 102, CPS 125, (CVL 207 or MEC 222), MTH 140, MTH 141, MTL 200, PCS 125, PCS 211
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
425
|
|
Hydrology and Hydraulic Engineering
|
|
|
Introduction to hydrologic principles. Components of the hydrologic cycle; Precipitation, interception, abstraction, infiltration, evaportranspiration, overland runoff, streamflow: hydrological data measurement and monitoring; rainfall-runoff relationships and analyses; surface water hydrology: runoff, unit hydrograph theory, synthetic hydrographs, flow routing. Urban hydrology: The Rational Method, sewer system hydraulics, detention basin design. Computer simulation models for urban and rural watersheds. Hydraulic applications in conduit flows: flow classification, shear stress and velocity distribution, pipe friction formula, energy equations, pump/pipeline systems. Open channel flow: application of the energy, momentum and continuity equations, channel bed friction, steady and uniform flow, specific energy, hydraulic jump, gradually varied flow, natural channel designs. Appropriate experimental laboratory work related to the area of hydraulic engineering.
|
|
|
|
Tut: 2 hrs./Lect: 3 hrs./Lab: 1 hr.
|
| Prerequisites: MEC 522
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
434
|
|
Geotechnical Properties of Soils
|
|
|
Introduction of structural and glacial geology; rock cycle; mineral and soil identification and classification; clay soil structure; weight-volume relationship; Atterberg limits; relative density; seepage theory; hydraulic conductivity measurements in the field and in the lab; flow nets; and principle of effective stress. Mohr-Coulomb failure criterion; shearing strength of saturated soils; consolidation theory, settlement prediction and computer assisted processing of laboratory test results.
|
|
|
|
Lect: 4 hrs./Lab: 3 hrs.
|
| Corequisite: CVL 420, Prerequisite: CVL 320
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 2
|
| back to top | |
|
|
CVL
|
533
|
|
Concrete Materials
|
|
|
Introduction to concrete as a construction material: performance requirements, strength, and durability. Aggregates: types, processing, beneficiation, testing, and quality control. Reclaimed concrete aggregates: uses and properties. Portland cement of different types: raw materials, manufacturing, composition, physical properties, testing, blended cement, hydration, and porosity. Supplementary Cementing materials: types, properties, hydration, and effects on concrete. Design of concrete mixtures for different applications. Chemical admixtures: types and uses. Mixing, placing, finishing, fresh and hardened properties and quality control testing of concrete. Concrete durability: freezing and thawing, reinforcement corrosion and chemical attacks. Volume change in concrete: shrinkage of different types, deformation and creep.
|
|
|
|
Lect: 3 hrs./Lab: 2 hrs.
|
| Prerequisite: CVL 420
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
553
|
|
Environmental Science and Engineering
|
|
|
This course provides an overview of the effects of environmental disturbances arising from over-population, urbanization, industrialization, and energy consumption. The basic scientific principles of environmental science in the areas of chemistry, physics, ecology, meteorology, microbiology, and epidemiology are reviewed. Preventive solutions and sustainable development are introduced. Concepts on the design of water supply and treatment are described. Water pollution studies include the introduction of water quality parameters, with a discussion on potable water supply including the source, quantity and quality requirements, and water distribution networks. Unit processes of water treatment, such as screening, solids separation, coagulation, flocculation, sedimentation, filtration, softening, and disinfection will be discussed in detail. Experimental laboratory work involving water quality determination: solids, alkalinity, hardness, BOD, chlorination, coliform and bacterial analyses.
|
|
|
|
Lect: 4 hrs./Lab: 2 hrs.
|
| Prerequisites: CVL 425
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
600
|
|
Foundation Engineering
|
|
|
Active and Passive earth pressure calculations. Design of earth retaining structures, walls, dikes, dams, open and supported excavations, shallow and deep foundations. Soil bearing capacity. Design of pile foundation and drilled caissons.
|
|
|
|
Tut: 2 hrs./Lect: 3 hrs.
|
| Prerequisite: CVL 434
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
609
|
|
Civil Engineering Systems
|
|
|
This course provides an introduction to systems analysis for problems in civil engineering. Systems analysis tools that facilitate decision-making in engineering design and management are presented with particular emphasis on fundamentals of systems approach, linear programming, integer programming, multiobjective programming, dynamic programming, sensitivity analysis, uncertainty modeling, Monte-Carlo simulation, and decision making under uncertainty. Applications to transportation systems, project management, civil structural design, geomatics engineering, water resources systems and environmental pollution control systems are emphasized.
|
|
|
|
Lect: 3 hrs./Lab: 2 hrs.
|
| Prerequisites: MTH 410 and MTH 510 and ECN 801
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
633
|
|
Highway Materials
|
|
|
Pavements types: flexible, rigid and composite. Properties, testing and selection of aggregates for highway purposes. Subgrade preparation and testing. Effects of environment on highways: water infiltration, ice lenses, frost heave and spring breakup. Highway drainage and design of soil filters. Use of geotextiles in highway construction. Soil stabilization for highways: types and applications. Performance-Graded Asphalt Binder: development, testing, and short and long-term performance. Design of asphalt mixtures using Marshall and SUPERPAVE methods. Construction and quality control: plant mix, types of asphalt plants, hot and cold recycling, and end-result specification for pavement works.
|
|
|
|
Lect: 3 hrs./Lab: 2 hrs.
|
| Prerequisites: CVL 420 and CVL 434
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
638
|
|
Wastewater Treatment Design
|
|
|
Wastewater engineering: waste water collection, sewer pipe system and appurtenance. Sewage treatment: primary, secondary, tertiary processes. Wastewater microbiology: microorganism classification, population dynamics, kinetics of decomposition. Unit processes of secondary treatment: trickling filters, activated sludge, rotating biological contractors. Sludge management, treatment, and ultimate disposal. Experimental laboratory work involving sedimentation model, chemical treatment: coagulation and flocculation, softening, disinfection, and microscopic analyses of sludge.
|
|
|
|
Lect: 3 hrs./Lab: 1 hr.
|
| Prerequisite: CVL 553
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
650
|
|
Satellite Geodesy
|
|
|
Introduction to geodesy, the earth and its motions, gravity field of the earth, the geoid, datums and coordinate systems, direct/inverse geodetic problems; basic concepts of satellite positioning, GNSS signal structure, orbital determination, pseudorange, carrier-phase and Doppler measurements, linear combinations of GNSS observables, GNSS errors and biases, mathematical models for absolute and relative positioning, static, kinematic and real-time kinematic (RTK) GNSS positioning, practical considerations.
|
|
|
|
Lect: 3 hrs./Lab: 2 hrs.
|
| Prerequisite: CVL 352
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
710
|
|
Photogrammetry and Digital Mapping
|
|
|
The overall objective of the course is to teach students the concepts and principles of determining spatial positions using photogrammetric techniques. This requires knowledge of terminology and concepts, imaging geometry, mathematical models, image acquisition techniques, processing and manipulation of image measurements, and processing and analysis of photogrammetric data. In addition, the students will be familiarized with digital mapping and digital terrain modeling (DTM) concepts and their implementation and applications in Geomatics and other related disciplines. Emphasis will be on mathematical techniques used in the acquisition, processing, storage, manipulation, and applications of digital map data and DTMs.
|
|
|
|
Lect: 4 hrs./Lab: 3 hrs.
|
| Prerequisite: CVL 652
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 2
|
| back to top | |
|
|
|
|
Alignment and cross-section design of roadways; intersection design; earthwork calculations and mass-haul diagrams; pavement design and management for flexible and rigid pavements; rural and urban highway drainage; barriers, guide rail and other highway hardware; Computer applications.
|
|
|
|
Tut: 2 hrs./Lect: 3 hrs.
|
| Prerequisite: CVL 323
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
736
|
|
Geospatial Information Systems
|
|
|
Introduction to geographical information systems (GIS) and science; coordinate systems used in the Lambert, Mercator, Transverse Mercator, and UTM map projections; vector and raster data, data structures and topological relationships; data modeling and managing and querying data in databases; vector and raster data exploration, analysis and processing; cartographic design principles, presentations, thematic maps and map generalization; geographic visualization and graphic communications; introduction to spatial modeling and analysis; network and 3D representation and analysis; data quality, spatial data integration, metadata and standardization issues; web GIS, mapping services and geospatial information dissemination; GIS implementation and organizational issues.
|
|
|
|
Lect: 3 hrs./Lab: 2 hrs.
|
| Corequisite: CVL 650, Prerequisite: CVL 323
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
737
|
|
Data Modelling and Estimation
|
|
|
Basic concepts of Geomatics data modeling and estimation, Geomatics measurements errors, measures of central tendency, covariance and correlation, covariance propagation, introductory probability theory, error ellipse and error ellipsoid, univariate statistical testing, principles of least-squares methods, parametric, condition and combined cases, partitioning, weighted and functional constraints, sequential solutions.
|
|
|
|
Lect: 3 hrs./Lab: 2 hrs.
|
| Corequisite: CVL 650, Prerequisites: CVL 323 and (MTH 203 or MTH 410) and (MTH 340 or MTH 425)
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
742
|
|
Project Management
|
|
|
Manual and computer techniques in planning, controlling and scheduling of construction projects. Includes topics such as: Network diagrams, CPM, PERT and simulation analysis; Cost accounting; Resource management; Decision making theory.
|
|
|
|
Lect: 3 hrs./Lab: 1 hr.
|
| Prerequisites: MTH 510 and ECN 801, Antirequisites: EMS 304 and IND 713
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
755
|
|
Capstone Design Project I
|
|
|
The Capstone is a practically oriented design project integrated over the different areas in which Civil programs are offered. Students will operate in consultant groups and will complete a design for a typical Engineering undertaking. The course involves professional engineers acting as clients and bringing in real-life design problems to pre-selected teams of 4 - 6 students. Project briefs are given to the student teams and proposals are prepared. At a general meeting the professional clients introduce their project, and the student teams then actively attempt to convince the clients of their suitability to perform the required design work through interviews with the clients and their proposals. At least two alternative designs for the project will be proposed and evaluated based on economic, environmental, and other considerations. At the end of the semester each team will determine the best alternative design for the project.
|
|
|
|
Tut: 3 hrs./Lect: 1 hr.
|
| Corequisite: CVL 411, Prerequisites: CVL 313, CVL 316 and CVL 410
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
810
|
|
Geomatics Network Design and Analysis
|
|
|
Pre-analysis and design of surveys; error detection; analysis of survey measurements; high precision, deformation and ground surveys; network design and analysis; multivariate statistical testing.
|
|
|
|
Lect: 3 hrs./Lab: 2 hrs.
|
| Prerequisites: CVL 650 and CVL 737
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
855
|
|
Capstone Design Project II
|
|
|
For the Geomatics Engineering Option, the students will form their groups during the first week of the winter term; project briefs will be given to the student teams and proposals will be prepared. For all other civil students this is a continuation of the work completed in CVL 755 Capstone Design Project I. All students will operate in consultant groups and will complete a design for a typical Engineering undertaking. The course involves professional engineers acting as clients and bringing in real-life design problems to pre-selected teams of 4 - 6 students. All student groups will submit a final report that includes a complete detailed design.
|
|
|
|
Tut: 3 hrs./Lect: 1 hr.
|
| Prerequisites: CVL 313, CVL 316, CVL 410
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
900
|
|
Pavement Design and Management
|
|
|
Introduction to pavement: pavement types and properties. Pavement performance and distress. Stress analysis of flexible and rigid pavements. Properties and characterization of paving materials. Design of flexible and rigid pavement using AASHTO and MTO methods. Design of overlays. The mechanistic-empirical approach of pavement design. Advances in pavement construction and rehabilitation. Pavement management systems. Review of highway and rehabilitation projects.
|
|
|
|
Lect: 3 hrs./Lab: 1 hr.
|
| Prerequisite: CVL 633, Antirequisite: CV8405
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
901
|
|
Municipal Solid Waste Management
|
|
|
Introduction to legislation and authority; integrated solid waste management planning; solid waste generation, characterization, and collection; collection and processing; reduction, reuse, and recycle; landfilling of municipal waste, site selection, development, hydrological factors, leachate and gas collection and control, closure; solid waste incineration.
|
|
|
|
Lect: 3 hrs./Lab: 1 hr.
|
|
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
902
|
|
Traffic Operations and Management
|
|
|
The course introduces topics related to the management of traffic on urban and rural road networks, including bicycle and pedestrian facilities. Topics include: capacity analysis for interrupted and uninterrupted flow facilities; deterministic and stochastic models for traffic flow; traffic simulation principles; freeway traffic management; signal timing for isolated intersections, networks and arterials; adaptive traffic control; safety of traffic management and engineering principles and techniques.
|
|
|
|
Lect: 3 hrs./Lab: 1 hr.
|
| Prerequisite: CVL 316, Antirequisite: CV8401
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
903
|
|
Water Resources Engineering
|
|
|
Development of water resources systems; statistical analysis of hydrologic data; drainage and runoff analysis; flood control and management; water pollution prevention and control planning; storage and conveyance system design and management; natural channel design and rehabilitation; comprehensive water resources development. (formerly CVL 845).
|
|
|
|
Lect: 3 hrs./Lab: 1 hr.
|
| Prerequisite: CVL 425
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
904
|
|
Structural Concrete Design II
|
|
|
Mechanics of reinforced concrete; truss model and compression field theory for beams failing in shear and torsion; design of two-way slabs; shear friction and horizontal shear transfer; design of deep beams and corbels; prestressed concrete; design of beams for flexure, shear , losses in prestress; design for camber, deflection and crack control; design of footings; isolated, combined and wall footings; design of long columns.
|
|
|
|
Lect: 3 hrs./Lab: 1 hr.
|
| Prerequisite: CVL 410, Antirequisite: CV8307
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
905
|
|
Bridge Design and Construction
|
|
|
Types of bridges; material properties and design of timber, steel and concrete elements; bridge loads; load distribution in bridge superstructures; simplified methods of analysis, with reference to the Canadian Highway Bridge Design Code; design of slab bridges; design of slab-beam bridges; design of box-girder bridges; joints, bearings, bridge piers and abutments.
|
|
|
|
Lect: 3 hrs./Lab: 1 hr.
|
| Prerequisite: CVL 411, Antirequisite: CV8308
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
906
|
|
Renovation/Repair of Existing Structures
|
|
|
Rehabilitation of civil infrastructure systems including aspects of deterioration science, nondestructive assessment, maintenance, renovation, rehabilitation and preservation of infrastructure; mechanisms of mechanical, chemical and biological infrastructure degradation; corrosion of steel condition surveys and evaluation of buildings and bridges repair and preservation materials, techniques and strategies; renewal engineering, construction planning, management, public policy, codes and guidelines; case studies.
|
|
|
|
Lect: 3 hrs./Lab: 1 hr.
|
| Prerequisites: CVL 410 and CVL 533, Antirequisite: CV8303
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
907
|
|
Behaviour and Design of FRP Structures
|
|
|
Mechanical properties of fiber reinforced polymer (FRP) materials, FRP composite structures, Design process for reinforcement versus strengthening, Design for flexure, Serviceability limit states, Shear design, Development and slicing of reinforcement, Constructability, Strengthening of beams/slabs and columns, Durability, Quality control and quality assurance, Case studies.
|
|
|
|
Lect: 3 hrs./Lab: 1 hr.
|
| Prerequisite: CVL 410
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
908
|
|
Structural Building Systems
|
|
|
The Course examines building geometries, loads, serviceability, ultimate limit state, procedure of using the national building code for governing loads on structural members. Foundation systems design including footing and pile cap design. Design details of low rise concrete and steel buildings. Design and optimization of long steel columns to accommodate buildings lateral drifts. Analysis of long concrete columns under lateral drift loads. Lateral load-resisting elements and bracing systems.
|
|
|
|
Lect: 3 hrs./Lab: 1 hr.
|
| Prerequisites: CVL 313, CVL 410, CVL 411, CVL 420
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
909
|
|
Non-Highway Transportation Systems
|
|
|
This course covers basic concepts in the planning, design, and operations of transportation systems other than highways. These systems include airports, ports, railways, public transit, and bicycles and pedestrians. Topic emphasis will vary by system, but general topics include physical characteristics, design considerations, capacity and level of service, and management strategies. Other tools applicable to all systems include systems analysis approach, analytical models, and economic analysis. Practical case studies are discussed.
|
|
|
|
Tut: 1 hr./Lect: 3 hrs.
|
| Prerequisite: CVL 316
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
CVL
|
910
|
|
Transportation Planning
|
|
|
This course deals with the process and techniques of transportation planning, with emphasis on urban and regional applications. Topics include: historical development of transportation planning in North America; transportation planning framework; surveys and data collection; transportation-land use interaction; analysis and models of transportation demand; analysis and models of transportation performance; development and evaluation of transportation planning options.
|
|
|
|
Tut: 1 hr./Lect: 3 hrs.
|
| Prerequisite: CVL 316
|
|
|
|
Course Weight: 1.00
|
|
Billing Units: 1
|
| back to top | |
|
|
